Extraction and spectrophotometric determination of zinc in coal fly ash and pond sediments with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of zinc with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid. The reagent forms a stable, blue 1:2 zinc/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the zinc(II) complex is 1.26 × 10⁵ l mol^?1 cm^?1 at 610 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper and nickel can be masked with dimethylglyoxime and aluminium and iron with a mixture of sodium fluoride and triethanolamine. The method is applied to the determination of zinc in coal fly ash and pond sediments with good precision and accuracy.     

Improvement of chemical analysis of antibiotics. X. Determination of eight tetracyclines using thin-layer and high-performance liquid chromatography

Analytical methods for eight tetracyclines (TCs) were established using silica gel high-performance thin-layer chromatography (HPTLC), reversed-phase thin-layer chromatography (RP-TLC) and high-performance liquid chromatography (HPLC). Good separations of eight TCs were obtained using chloroform-methanol-5% disodium ethylenediaminetetraacetate solution (65:20:5) (lower layer) and methanol acetonitrile 0.5 M oxalic acid solution (1:1:4) (pH 3.0) on silica gel HPTLC and C8 TLC plates, respectively. A combination of HPTLC and RP-TLC made possible the identification of the eight TCs. Each calibration graph was linear between 0.1 and 1.0 microgram using UV densitometry except for rolitetracycline. For detection reagents, the diazonium salts including Fast Violet B gave variously coloured spots with the eight TCs and good sensitivities were obtained except with minocycline. In HPLC, the simultaneous analysis of the eight TCs on a C8 column was possible using methanol-acetonitrile-0.01 M oxalic acid solution (1:1.5:7) adjusted to pH 3.0 as the mobile phase. A linear relationship was obtained between 1.0 and 10 ng using the usual sample preparation except for rolitetracycline. The direct determination of rolitetracycline was possible using tetrahydrofuran, dimethyl sulphoxide and the mobile phase as solvents for preparation of the sample. For the determination of residual rolitetracycline, it was effective to measure the amount of rolitetracycline as tetracycline by HPLC, HPTLC and RP-TLC after conversion of rolitetracycline to tetracycline by incubating for 5 min in methanol at 50 degrees C.     

Carrier generation process on photoconductive polymer films as studied by magnetic field effects on the charge-transfer fluorescence and photocurrent

We have studied the magnetic field effects (MFEs) on the charge-transfer fluorescence and transient photocurrent of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) film, which reflect the recombination and escape yields of the carriers, respectively. The recombination yield dependence of the external magnetic field (B) clearly shows two types of the MFEs, growth with increasing B due to the hyperfine mechanism (HFM) and a negative dip due to the level-crossing mechanism (LCM). On the other hand, the escape yield indicates complementary MFEs with a sharp decrease in yield with increasing B and then a positive dip. Simultaneous observation of the HFM- and LCM-MFEs proves the stepwise hole-hopping mechanism rather the long-range hole-jumping one. The quantitative analysis of the recombination and escape MFEs is performed using the stochastic Liouville equations (SLE) for a one-dimensional lattice model in which the stepwise hole hops take place between the nearest neighbor carbazole units with spin conservation. The SLE analysis provides the recombination and hole transfer rate constants of 7.0 x 10(7) and 4.5 x 10(8) s(-1), respectively. The boundary site number for the ion pairs in the one-dimensional model is estimated by the best fit to the experimental results. The interionic distance of the boundary ion pair in the one-dimensional model including eight sites agrees with the thermalization distance in the Onsager model. Hence, it is concluded that the elementary processes in the Onsager model applied to molecular amorphous solids are the stepwise hole hops rather than a long-range hole jump.     

Induced Circular Dichroism and Magnetic Circular Dichroism Spectra of Maleimide and Related Molecules

The induced circular dichroism (ICD) spectra of the inclusion complexes of maleimide, phthalimide, and naphthalene‐2,3‐dicarboximide with β‐ or γ‐cyclodextrin (CDx) have been measured. The structure of the CDx inclusion complexes are interpreted by the signs and shapes of ICD spectra compared with the results of PPP calculations. In maleimide and naphthalene‐2,3‐dicarboximide, the ICD spectra of the β‐CDx inclusion complex are very similar to those of the γ‐CDx inclusion complex in spite of the differences in dimensions between the cavity of β‐CDx and that of γ‐CDx. In phthalimide, the ICD spectra of the β‐CDx inclusion complex are very different from those of the γ‐CDx inclusion complex. The split‐type ICD bands at 220–235 nm show that the dimer of phthalimide is formed in the presence of β‐CDx.     

Development of high-temperature pulsed slit nozzle and its application to supersonic jet absorption spectrometry

A high-temperature pulsed slit nozzle, consisting of a circular pulsed nozzle and an interface to convert a circular flow into a slit flow has been constructed. The absorption spectrum is measured by scanning the wavelength of the monochromator equipped with a xenon arc lamp and by detecting the transmitted light through a jet with a photomultiplier. A rotationally cooled spectrum is clearly observed for aniline only when a long slit nozzle is employed. The absorptivity increases proportionally to the slit length at least up to 6 cm. The time for recording a spectrum is 3.5 min, which is reduced to several seconds by transmitting a white light through a jet and by measuring the spectrum with an optical multichannel analyzer. The detection limit is estimated to a partial vapor pressure of 0.4 torr for aniline. The present system can be conveniently used in routine analysis, because of a wide spectral coverage of the lamp source.     

Nuclearg-factors of the 1229 and 2911 keV isomers in143Nd

Nuclearg-factors of the 1229 keV 13⁺/2 and 2911 keV 21⁺/2 level and the half-life of the 1229 keV level have been measured to beg(1229)=0.058(5),g(2911)=0.69(12) andT _1/2 (1229)=6.79(2) ns. The experimental g-factors show that the 1229 keV level has a dominant configuration of (f _7/23^–), and the 2911 keV level has an almost pure (f _7/27^–), configuration.The authors would like to thank the crew of CYRIC for the operation of the cyclotron.     

Volumetric study on the inclusion complex formation of α- and β-cyclodextrin with 1-alkanols at different temperatures

The partial molar volumes (V_a) of 1-alkanols (carbon number, m=5, 6, 7) in - and -cyclodextrin (CD) solutions at 5.00 mmol kg^–1 have been determined as a function of alkanol concentration (C_a) between 293.2 and 308.2 K by using a dilatometer. It has been observed that with an increase in C_a, V_a increased in -CD solution but decreased in -CD solution, asymptotically to a value of V_a in CD-free water. The dependence of V_a on C_a provided the binding constant (K) of 1:1 complex, the volume change in complex formation, and the partial molar volume of complex itself. The complex formation mechanism has been discussed on the basis of these values and their carbon number dependences in the respect of geometric behavior, hydrophobic interaction, and van der Waals interaction. It is concluded that the CD cavity in water is not rigid but flexible for fitting in nicely with guest molecule.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.